Tags/penandaan: Kyoritsu KEW 4200 Earth Clamp Tester

Kyoritsu KEW 4200 Earth Clamp Tester

rating

Rp16.860.000,00

Ex Tax: Rp16.860.000,00
Merek Kyoritsu
Kode Produk: 4200
Ketersediaan: Tersedia

Earth Clamp TestersMODEL 4200• The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes.(The Multiple Earthing ..

Dukungan Pengiriman

	Layanan	Estimasi	Biaya

Earth Clamp Testers

MODEL 4200

• The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes.
(The Multiple Earthing System.)
• True RMS
Accurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A
• Noise Check Function
A function to detect current, which effects on an earth resistance measurement and display "NOISE" mark on the LCD.
• Memory function
Save and display up to 100 measurement data.
• Data hold function / Buzzer function / Back light function
• Compliant with Safety Standards of IEC 61010-1 : CAT IV 300V Pollution degree2

Note:
A single earthing can not be measured. (Only for Multiple Earthing System)

Earth resistance Auto range	20.00/200.0/1500Ω ±1.5%±0.05Ω(0.00 - 20.99Ω)* ±2%±0.5Ω(16.0 - 99.9Ω) ±3%±2Ω(100.0 - 209.9Ω) ±5%±5Ω(160 - 399Ω) ±10%±10Ω(400 - 599Ω)
AC current (50Hz/60Hz) Auto range	Values are displayed, but accuracy isn't guaranted(600 - 1580Ω) 100.0/1000mA/10.00/30.0A ±2%±0.7mA(0.0 - 104.9mA) ±2%(80mA - 31.5A)
Operating indication	Earth resistance function : Constant voltage injection Current detection (Frequency : Approx.2400Hz) Dual Integration AC current function : Successive approximation
Over-range indication	"OL"is displayed when input exceeds the upper limit of a measuring range
Response time	Approx. 7 seconds (Earth resistance) Approx. 2 seconds (AC current)
Sample rate	Approx. 1 times per second
Current consumption	Approx. 50mA (max.100mA)
Measurement time	Approx.12 hours (when R6 is used) Approx.24 hours (when LR6 is used)
Auto power-off	Turns power off about 10 minutes after the last button operation.
Conductor size	Approx. Ø32mm
Applicable standards	IEC 61010-1 CAT Ⅳ 300V Pollution degree2 IEC 61010-2-032, IEC 61326 (EMC)
Power source	DC6V : R6(sizeAA manganese battery) x 4 or LR6 (sizeAA alkaline battery) x 4
Dimensions	246(L)×120(W)×54(D)mm
Weight	Approx. 780g (including batteries)
Included Accessories	R6 x 4, Instruction manual 8304 (Resister for operation check) 9166 (Carrying case[Hard])